SPECIFICATIONS:

BODY: Hand made at Onyx Forge - Thin body Deluxe 'T', bookmatched flame Robusta Eucalyptus on one piece Honduran Mahogany - Semi chambered with "F" hole; belly contour; Bigsby B5 (American) lefty vibrato; locking roller bridge; custom control layout, Naturalburst face and back with undyed binding stripe under gloss nitrocellulose lacquer; custom pickguard made of rare spalted burl Maple under satin nitro; Dunlop Straploks; recessed Electrosocket stereo jack; polished 18-8 stainless steel screws throughout; rear loaded volume / tone controls, Ebony dome knobs; Robusta Eucalyptus control cover; custom Ebony pickup mounting ring under satin nitro.

NECK: Hand made at Onyx Forge - Quilted Maple; 13 degree tilt 6/side O. Forge "Vintage" headstock; Robusta Eucalyptus head plate with undyed binding stripe to match body; Ebony fretboard with custom Playing Card inlays in white Mother of Pearl and Bloodwood; custom Ebony truss rod cover under satin nitro, white Mother of Pearl Onyx Forge logo; Paua Abalone side markers; 14" radius fretboard; 25.5" scale; custom thin profile with rolled edges; Grover locking 18:1 tuning machines; 22 medium jumbo stainless steel frets; recessed and filled fret slot ends; zinc alloy threaded inserts for strength and outstanding sustain; dual carbon fiber reinforcing rods; double action truss rod; 1 11/16" nut width; custom laminated Graphtech & brass alloy 260 nut; dark amber under gloss nitrocellose lacquer.

ELECTRONICS: Loaded with a Gemini "Vampire Lord" asymmetrically wound humbucker in the neck (when split to single coil mode, the output is similar to a hot single coil), Rio Grande "Crunchbox" in the bridge; both splittable to single coil mode via push / pull volume knobs; dedicated independent volume and tone controls for each PUP routed through push / pull tone knobs that when pulled, route that pickup's output to channel "B" for stereo. 2 - way mini switch de-phases neck & bridge pickups; grounded conducting paint in all control cavities for noise mitigation. This configuration can be used with either a standard guitar cord, or a stereo 'Y' cord to route the signals to either 2 channels or separate amps.

OTHER: